Table of Contents
Advertisement
Fujitsu and Fujitsu Customer Use Only
Transmit-Receive Overall Performance
Item
Upfade BER
Downfade BER
Residual BER
Signal Interface
Ethernet 10GbE Optical Interface
SFP Used
Specification
Transmission Speed
Transmission Capacity
Optical Fiber used
Optical Fiber Wavelength
Output Level (average)
Input Level (average)
Typical Reach
Coding Method
Networking
Synchronization
1-hop, One-way Latency
Connector used
RroadOne GX4000 Manual (R3.0) issue 1.03
Table 1.4-5 BER Performance Overall
BER = 10 –6 at RSL of –25 dBm typical
BER = 10 –6 at RSL of –28 dBm guaranteed
measured at antenna RF input port
BER = 10 –6 at RSL of –54 dBm typical
BER = 10 –6 at RSL of –50.7 dBm guaranteed
measured at antenna RF input port
BER < 10 –12 /hop/day at normal receiving condition (Typical)
BER < 10 –11 /hop/day at normal receiving condition
(Guaranteed)
Table 1.4-6 10GBASE-LR Optical Interface
10G Gigabit Ethernet optical transceiver
IEEE802.3ae
10.3125 Gbit/s
3,000 Mbit/s
1.31 μm single-mode fiber
1.260 to 1.355 nm
-10.2 to +1.5 dBm on XFP using 5 m cable
-10.6 to +0.5 dBm on XFP using 5 m cable
10 km (maximum)
64B/66B
Tag VLAN, Port VLAN
SyncE, not supported IEEE1588
< 60 μsec excluding transmission path
LC duplex
Description
System Description
1-19
Advertisement
Table of Contents
