Table of Contents
Advertisement
Installation
Step-7: Fitting thermal tube & silk tape
Fit the thermal tube between CN1 and cable.
Thermal tube
Step-8: CN1 Assembly
Cup Ring
- Rated fixing torque for cup ring and code can is 3N/m.
- A part of male screw for code can is lock tight painted to prevent loose contact.
- Rated fixing torque for code can and crump is 3N/m.
- Crump and crump tip is fixed together with cable. Rated fixing torque of bolt is 0.3-0.35N/m.
Step-9: Wrap self-bonding insulating tape
2-36
Wrap the silk tape to become φ11
Ruber
Tightning material
Crump
Code can
Wrapping self-bonding insulating tape
> 20 mm
BroadOne GX4000 Manual (R3.0) issue 1.03
Fujitsu and Fujitsu Customer Use Only
Crump tip
Advertisement
Table of Contents
