Table of Contents
Advertisement
Fujitsu and Fujitsu Customer Use Only
Step-10: Fitting thermal tape to the CN1
Step-11: Crump of TM1 to TM3
Crumping by tool
Crumping terminal
M4 & 0.75 mm
Step-12: Frame ground (FG)
One end of UL1007-AWG18 cable is skinned by 30 mm and soldered. Other end is skinned by
4.5 to 5 mm.
BroadOne GX4000 Manual (R3.0) issue 1.03
Thermal tape
2
Crumping by tool
Crumping terminal
2
M4 & 1.5 mm
Installation
2-37
Advertisement
Table of Contents
