Advertisement
GET FAMILIAR WITH YOUR BB2 WIFI ROUTER
Wifi Router
USB Cable
Ethernet Cable
Power Cord
Remote Control
OPERATING THE BB2 WIFI ROUTER
HOW TO SET UP YOUR WIFI ROUTER
1. Plug the power cord into a wall outlet and connect it to the
back of the router.
2. Insert the Ethernet cord into the wall outlet for the internet
and connect the other end into the Yellow Internet slot on the
back of the router.
3. Push in the Power Button on the back of the router.
4. Wait until the Power Light and Internet Light turns green.
5. Turn on the Wifi by pressing the Wireless Button on the back
of the router. (Once you press it the Blue wifi light will turn on
in the front of the router)
HOW TO TURN ON THE BB2 WIFI ROUTER
1. Point the Remote Control to the hole above "NETGEAR" in the
front of the router and press the "Power Button". (The Green
Light will turn on in the back of the router)
2. The router's camera is now in Standby Mode
Advertisement
