Table of Contents
Advertisement
Quick Links
Always Moving Forward
Operating Manual
Please Read Before Operating Unit
Model MMC100 Multi-Material Cutter
Service and All Spare Parts Available
The Eraser Company, Inc.
Eraser International Ltd.
PO Box 4961/ Oliva Drive
Unit M, Hunting Gate
Syracuse, NY 13221, USA
Andover SP10 3SJ, England
Phone: (315) 454-3237 / Fax: (315) 454-3090
Phone: (01264) 351347 / Fax: (01264) 355030
Website: www.eraser.com
Website: www.eraser-international.com
E-mail: info@eraser.com
Email: sales@eraser-international.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eraser MMC100
Summary of Contents for Eraser MMC100
- Page 1 Always Moving Forward Operating Manual Please Read Before Operating Unit Model MMC100 Multi-Material Cutter Service and All Spare Parts Available The Eraser Company, Inc. Eraser International Ltd. PO Box 4961/ Oliva Drive Unit M, Hunting Gate Syracuse, NY 13221, USA...
-
Page 2: Specifications
Blades......Hardened and ground tool steel guillotine and anvil blades. Decibel Rating..........65 dB(A) Eraser Company Inc. • Syracuse, NY USA • Ph: 315-454-3237 • info@eraser.com • www.eraser.com • Fax 315-454-3090 Eraser International Ltd. • England • Ph:(01264)351347 • sales@eraser-international.com • www.eraser-international.com • Fax (01264)355030... -
Page 3: Operation
BATCH” screen. The unit is now ready for program- ming. Place the material to be cut on the de-reeler. Turn the MMC100 on using the I/O switch on the side of the unit. Do not turn the unit on and off repeat-... -
Page 4: Blade Replacement
1-10 will not be accepted. Inputs that POWER FAILURE are not recognized will emit a beep. Press ENTER In case of power failure the MMC100 will be or RUN to continue. The functions in figure 1 will reinitialized and should not start unexpectedly. All be displayed on the keypad display. -
Page 5: Blade Adjustment
5. Replace the lower blade by securing it with the 6. Raise the upper blade and slowly lower it back three fasteners using the 9/64” Allen wrench pro- down. There should be a smooth shearing action vided. like a pair of scissors. If not, repeat steps 3 thru 5 again until you achieve a smooth shearing action. - Page 6 Also use face or dust mask if cutting repaired or altered by anyone other than Eraser, or operation is dusty. which has been used in a manner or for a purpose for which the product was not designed.
- Page 7 SPECIFICATIONS Left Blade Right Blade Holder Holder Knuckle with Key Upper Blade Lower Blade Holder Right Tension Screw Left Tension Screw Specification Photo 1 Firmly grasp both cap screws and push blade off of the knuckle key, lower blade and remove from machine.
- Page 8 Lower Blade Holder Screws Specification Photo 4 The Eraser Company, Inc. Eraser International Ltd. PO Box 4961/ Oliva Drive Unit M, Hunting Gate Syracuse, NY 13221, USA Andover SP10 3SJ, England Phone: (315) 454-3237 / Fax: (315) 454-3090 Phone: (01264) 351347 / Fax: (01264) 355030 Website: www.eraser.com...
Need help?
Do you have a question about the MMC100 and is the answer not in the manual?
Questions and answers