Placing The Base On A Desk Top - Radio Shack ET-596 Owner's Manual

43-696a.fm Page 7 Friday, August 13, 1999 12:48 PM
Placing the Base
on a Desk Top
Follow these steps when you place
the base on a desk, shelf, or table.
1. If you have a single 2-line modular
jack, plug one end of the supplied
modular cord into the
jack.
Note: When you make this con-
nection, you should not connect
another modular cord to the
jack or phone operation will
LINE 2
be erratic.
If you have two separate 1-line
modular jacks, plug one end of the
supplied modular cord into the
TEL LINE 1/2
another modular cord (not sup-
plied) into the
TEL LINE 2
TEL LINE 1/2
TEL
jack and plug
jack.
If you have only one 1-line modu-
lar jack, plug one end of the sup-
plied modular cord into the
jack to use line 1, or to
LINE 1/2
the jack to use line 2.
TEL LINE 2
2. Plug the supplied AC adapter's
barrel plug into the
3. Route the adapter's cord through
the strain relief slot.
Strain Relief Slot
4. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
TEL
jack.
DC IN 9V
7