Charging The Speaker; Pairing Your Device; Pairing Your Device With Nfc; Using Big Blue Party X After Pairing - Brookstone Big Blue Party X Manual

CHARGING THE SPEAKER

1 . Lift the RUBBER COVER and connect the ADAPTER's jack to the DC IN
POWER PORT on the Big Blue Party X .
2 . Plug the ADAPTER into an electrical outlet .
3 . The CHARGING LED INDICATOR is RED while the speaker is charging .
When the speaker is fully charged, the CHARGING LED INDICATOR turns off .
For first time use, charge the speaker for at least 5 hours .
4 . When speaker's battery is low, the CHARGING LED INDICATOR
will flash RED .

PAIRING YOUR DEVICE

1 . Prepare your device to pair using Bluetooth
33 feet of Big Blue Party X . Refer to your device's owner's manual for details if
necessary .
2 . Press the POWER/PAIRING button on the main unit to turn on the Big Blue
Party X until the LED RING illuminates solid and a tone sounds .
3 . Press and hold the Power/Pairing button on the main unit until the LED
RING starts pulsing .
4 . The Big Blue Party X is in pairing mode when the LED RING is pulsing . Big
Blue Party X will wait for a connection in pairing mode for up to 120 seconds .
5 . Once Big Blue Party X is in pairing mode and your device is ready to pair,
select "Big Blue Party X . " If prompted, use 0000 as a PIN for the pairing code .
6 . Once Big Blue Party X is selected, the LED RING will change to solid blue and
a tone will sound to confirm pairing is complete .
8
® , making sure you are within
Note: To cancel the pairing mode press the POWER/PAIRING button to
power the unit off, or wait the 120 seconds for Big Blue Party X to cancel
pairing automatically. The LED RING will return to solid blue, and the unit will
remain on.

PAIRING YOUR DEVICE WITH NFC

1 . Enable your device for NFC pairing . Refer to your device's owners manual for
details if necessary .
2 . Touch your device to Big Blue's NFC SENSOR (indicated by a small circle
located on the top of the speaker) . Confirm the connection on your device .

USING BIG BLUE PARTY X AFTER PAIRING

1 . Press the POWER/PAIRING button to turn on the Big Blue Party X until the
LED RING illuminates solid and a tone sounds .
2 . Big Blue Party X should automatically remember your device . Depending upon
your device, you may have to select "Big Blue Party X" in your device's menu .
3 . To turn Big Blue Party X off, press the POWER/PAIRING button .
Note: When Big Blue Party X is powered on, pressing any button will
activate the function LEDs, LED RING, AND HANDLE LEDs for 5 seconds.
After 5 seconds has passed, the function LEDs turn off and the LED RING
and HANDLE LEDs remain on at a low brightness level.
Note: If there is no Bluetooth connection to Big Blue Party X, the speaker will
auto power off after 3 hours to preserve battery life when it is not charging or
using AUX IN.
9