Brookstone Aviator Mini Wireless Speaker - Wireless Speaker Guide

Brookstone Aviator Mini Wireless Speaker - Wireless Speaker Guide

Also See for Aviator Mini Wireless Speaker:

Advertisement

Brookstone Aviator Mini Wireless Speaker - Wireless Speaker Guide

LOCATION OF PARTS AND CONTROLS

Parts and Controls Overview

  1. Dust Cover
  2. Charging LED indicator
  3. Micro USB Port
  4. Volume Down Button
  5. Volume Up Button
  6. Play/Pause Button
  7. LEDs indicator
  8. Micro USB Charging Cable (not shown)

PAIRING YOUR DEVICE

  1. Prepare your device to pair using Bluetooth® technology, making sure you are within 33 feet of the speaker. Refer to your device' s owners manual for details if necessary.
  2. Press and hold the '' button until the speaker power on enter autopairing mode. The LEDs Indicator light will flash quickly and the speaker will sound beeps.
  3. The speaker will wait for a connection in pairing mode for 30 minutes. If it does not pair with a device, it will power off.
  4. Once the speaker is in pairing mode and your device is ready to pair, select "Jet speaker". If prompted, use 0000 as a PIN for the pairing code. Once the speaker is selected, the LEDs Indicator will flash slowly and beeps will sound to confirm pairing complete.

CHARGING THE SPEAKER

  1. Connect the USB Cable (included) to the Micro USB Port on the speaker.
  2. Plug the other end of the USB Cable into a USB Port on your computer or USB wall adapter.
  3. The charging LED Indicator will illuminate red while charging, and the light will change to blue when the speaker is fully charged. Charges in approximately 1 hours for up to 6 hours of listening enjoyment.

LISTENING TO YOUR AUDIO DEVICE

  1. Play your audio device as you normally would.
  2. Volume may be adjusted on your audio device or by a single press the '' or '' buttons on the speaker.
  3. Press and hold the '' or '' button will advance to the next track or go back to the previous track.
  4. To pause audio, press the '' button on the speaker. To resume audio playback press the '' button again.
  5. Press and hold the '' button to power the speaker off. The speaker will sound beeps and the LEDs will go out.

CARE AND STORAGE

  1. Store the speaker in its compact form in a cool, dry place.

SPECIFICATIONS

Power Supply: 5V, 500mA
Total Output: 3W
Range: Class 2, up to 33 ft (10 m)
Li-ion Rechargeable Battery: 300mAh
Speaker: 1.23 inch, 4 Ohm
Charging Time: Approx. 1 hours
Battery Life: Approx. 6 hours
Compatibility: Bluetooth® 2.0 or above device with A2DP/AVRCP

LITHIUM-ION BATTERY WARNINGS

This device contains a non-removable lithium-ion battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.

Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at 1-800-292-9819
Merrimack, New Hampshire, USA 03054
800-846-3000
Brookstone.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Brookstone Aviator Mini Wireless Speaker - Wireless Speaker Guide

Advertisement

Need help?

Need help?

Do you have a question about the Aviator Mini Wireless Speaker and is the answer not in the manual?

Questions and answers

Table of Contents