Advertisement
2
X 1
2
Electronic Scorer Operation
Battery Installation
1. Using a Phillips Head Screwdriver (not included), remove the battery box cover on the back of the control box and install 3
new "AAA" batteries.
2. Replace the battery box cover using a Phillips Head Screwdriver (not included).
Reminder:
a. Batteries must be installed according to the correct polarization (+and -) required.
b. If the game will not be used for a long period of time, we recommend that the batteries should be removed.
c. Please clean the battery contacts and also those of the device prior to battery installation.
Game Instructions
1. Press the ON/OFF key to turn the power on.
2. Select the game mode by pressing the UP or DOWN keys. Choose "Training", "KO" or "SpeedBag" modes.
3. Press SELECT/ENTER.
4. Press UP or DOWN to choose between Boxing, Kicking or Kick Boxing.
5. Press SELECT/ENTER.
6. Press UP or DOWN to choose a difficulty level, 1, 2 or 3.
7. Press SELECT/ENTER.
8. Press UP or DOWN to choose the time limit, from 1 to 5 minutes. The default is 3 minutes.
YUS470_017M
FIG. 3
Connect the electronic
wire to the LCD
control box.
!
WARNING:
1) Requires 3 "AAA" batteries (not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or
rechargeable (nickel-cadmium) batteries.
(Continued on the next page.)
14 pins
14 pins
control box
control box
ON/OFF
UP
RESET
DOWN
VOLUME/SOUND
ENTER/SELECT
ON/OFF
6
electronic
wire
www.themdsports.com
Advertisement
