Table of Contents
Advertisement
43-1018.fm Page 13 Tuesday, August 17, 1999 8:53 AM
• When dialing a number, if you
press a number and 3 short beeps
sound, you are out of the base's
range, the battery is too low, or
there is too much interference on
the line. Move the handset closer
to the base or recharge the bat-
tery, if necessary.
USING REDIAL
To quickly redial the last number di-
aled, simply lift the handset from the
base or press
TALK
cator lights. Then press
The redial memory holds up to 80 dig-
its, so you can redial long distance as
well as local numbers.
Notes:
• We recommend you not use
to dial numbers that
REDIAL
include a
TONE
Tone Services on a Pulse Line").
• The redial memory does not store
a
entry or any digits
FLASH
entered after you press
so the TALK indi-
REDIAL
.
entry (see "Using
.
FLASH
USING FLASH
Use
on the handset to send the
FLASH
electronic equivalent of a switchhook
press for special services, such as call
waiting.
For example, if you have call waiting,
press
to take an incoming call
FLASH
without disconnecting the current call.
Press
again to return to the first
FLASH
call.
Notes:
• If you do not have any special
phone services, pressing
might disconnect the current call.
• The redial memory does not store
a
entry or any digits
FLASH
entered after you press
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank
by phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
FLASH
.
FLASH
13
Advertisement
Table of Contents
