Non-Gigastor-Specific Settings - Network Instruments GigaStor User Manual

Figure 2: GigaStor Control Panel Summary tab
If desired, you can further constrain the display of packets by MAC Stations, IP Stations, IP Pairs, etc., by clicking
on the appropriate Statistics tab and selecting the items you want to see on the Detail Chart.
Press the Settings button. Under General Options, uncheck Enable Analysis types if you are not using 4G LTE,
FIX, etc. This will remove them from the Reports/Statistics ribbon.
Use the left/right arrow on the Reports/Statistics ribbon to move it to the right to see the
Pressing this button maximizes or minimizes the Reports/Statistics section. Now you can more easily work with
and view reports and statistics for your selected time frame. You can filter or select a specific area of interest,
such as HTTP. Press the Analyze button and choose Filter Using Selected GigaStor Entries to open Expert
Analysis and decode tools focused on just your area of interest.

Non-GigaStor-specific settings

The GigaStor Control Panel is a portion of the Observer analyzer. Some settings in the Observer analyzer affect
the GigaStor. Some things you may want to configure in Observer include:
Discovering host names so that GigaStor resolves and uses host names. See the Discovery section in the
Observer User Guide.
Protocol definitions. This is particularly important if you have custom protocols you want to monitor. See
the Discovery section in the Observer User Guide.
button if needed.
Non-GigaStor-specific settings | 9