Packing Instruction - McIntosh MC206 Owner's Manual

www.freeservicemanuals.info
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the three plastic feet are at-
tached to the bottom of the equipment. Three #10 x 2-1/2
inch screws and washers must be used to fasten the unit
securely to the bottom pad and wood skid. This will ensure
the proper equipment location on the bottom pad. Failure to
do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
Quantity
1
4
1
1
1
3
1
3
3
4
4
4
Digitized in Heiloo Netherland
Packing Instructions
Part Number Description
033888 Shipping carton only
033887 End cap (Foam pad)
033697 Inside carton only
033725 Top Pad
034008 Bottom pad
017218 Plastic foot (spacer)
033699 Shipping skid
101169 #10 x 2-1/2 inch Wood screw
104033 #10 x 1-3/4 inch Flat washer
017218 Plastic foot
100159 #10-32 x 3/4 inch Machine
screw
104083 #10 x 7/16 inch Flat washer
5/10/2017
15