Table of Contents
Advertisement
43-1111.fm Page 6 Tuesday, June 29, 1999 3:38 PM
INSTALLATION
MOUNTING THE PHONE
You can place the ET-1111's base on a
desk or table, mount it on a standard
wall plate, or mount it directly on a wall.
Choose a location that is:
• near an AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the hand-
set's range. If you have a choice of sev-
eral locations, try each to see which
provides the best performance.
Caution: You must use a Class
!
2 power source that supplies 9
volts DC and delivers at least
350 mA. Its center tip must be set to
positive and its plug must fit the ET-
1111's
jack. The supplied
DC IN 9V
adapter meets these specifications. Us-
ing an adapter that does not meet these
specifications could damage the ET-
1111 or the adapter.
The supplied RadioShack adapter was
designed specifically for your ET-1111.
Use only the supplied adapter.
Notes:
• Your telephone connects directly to
a modular phone line jack. If your
phone line jack is not a modular
6
jack, you can update the wiring
yourself, using jacks and adapters
available
from
dioShack store. Or, you can let the
telephone company update the wir-
ing for you.
• The USOC number of the jack to be
installed is RJ11C, or RJ11W for a
wall plate jack.
On a Desk
Follow these steps when you place the
base on a desk or table.
1. Plug one end of the supplied long
modular cord into the
on the back of the base.
2. Plug the modular cord's other end
into a modular phone line jack.
3. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
your
local
Ra-
jack
TEL LINE
jack on
DC IN 9V
Advertisement
Table of Contents
