Fujitsu UTB-YDB Installation Instruction page 10

Temperature Range Settings
To set the temperature range
1
Decrement Increment
Press the Set Time buttons to
set the temperature range.
G The temperature range set for heating operation is different.
: 10 °C – 30 °C (48 °F – 88 °F)
: 16 °C – 30 °C (60 °F – 88 °F)
Press the ENTER button.
2
Check that
seconds.
Temperature Display Settings
To switch the temperature display
1
Decrement Increment
Press the Set Time buttons to
set the temperature display.
Press the ENTER button.
2
Check that
seconds.
Moving to " Indoor Unit Registration"
To move to indoor unit registration
Pressing once moves to indoor unit
registration
Pressing seven times moves to indoor
unit registration
En-10
(This changes the temperature range.)
Check that it is
Temperature range setting
3
and flash for two
(This switches the display between Celsius and Fahrenheit.)
Check that it is
Temperature display setting
Celsius
3
and flash for two
Press the Set Temperature button
perature button
tion.
.
DAY
Press the DAY button to move to "
Temperature Display Settings."
.
Fahrenheit
Press the DAY button twice to move
DAY
to " Setting the Group remote con-
troller address."
once or press the Set Tem-
seven times to move to indoor unit registra-