Using The Speakerphone; Using Hold; Using Mute; Using Redial - Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting ID Owner's Manual

43-5520.fm Page 14 Friday, July 21, 2000 8:01 AM
Once you set the volume level, the setting is
maintained even after you hang up the
phone.
Note: When you press
VOL/CID
volume is maximum or VOL/CID
volume is low, the setting does not change
and the phone beeps three times.
USING THE
SPEAKERPHONE
To make or answer a call using the speaker-
phone, press . The SPEAKER indi-
SPEAKER
cator lights. When you hear a dial tone, dial
the number.
To set the speakerphone's volume, slide
on the right side of the base.
VOLUME
To end a speakerphone call, press
again.
Switching Between the Handset
and Speakerphone
To switch to the speakerphone while you are
using the handset, press
base. When you hear the conversation or
dial tone on the speakerphone, press
on the handset.
To switch to the handset while you are using
the speakerphone, simply lift the handset off
the base. If the handset is away from the
base, press , then press
TALK
Using Both the Handset
and Speakerphone
If someone else is using the speakerphone,
press on the handset to join the con-
TALK
versation.
If someone else is using the handset, press
on the base to join the conversa-
SPEAKER
tion.
14
During the call, one person can hang up and
another person can continue the call at the
other keypad. Or, both people can hang up
at the same time to end the call.
8 8 8 8
while the
9 9 9 9
Note: If you hear a high-pitched noise from
while the
the base's speaker, the handset and the
base are too close together.

USING HOLD

Press
hold. The HOLD indicator lights. While a call
is on hold, you can make an intercom call
(see "Using Page/Intercom" on Page 15) be-
tween the handset and the base without dis-
connecting the call.
To release a call from hold, lift the handset
and press
the base, or pick up any extension phone on
SPEAKER
the same line.

USING MUTE

While talking on the speakerphone, you can
temporarily turn off the phone's microphone
by pressing
on the
SPEAKER
hear you. The SPEAKER indicator flashes.
TALK
Press
conversation.
Note: If the phone is close to loud noises
while you are using the speakerphone, the
phone might not switch to let you hear the
.
SPEAKER
person on the other end of the line. If this
happens, press
phone so you can hear the caller. Press
MUTE

USING REDIAL

You can quickly dial any of the last three
numbers you dialed recently on the handset.
Lift the handset and repeatedly press
PAUSE
Operation
to put a speakerphone call on
HOLD
, press
TALK SPEAKER
so the other party cannot
MUTE
or to resume your
MUTE SPEAKER
to turn off the micro-
MUTE
again to speak.
until the number you want to dial dis-
or on
HOLD
RDL/