Demo Mode; System Language - Pioneer MVH-2300NEX Operation Manual

NOTE
To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 81).
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
[Back Camera Input]
[On] [Off]
[Camera Polarity]
[Battery]
[Ground]

[Demo Mode]

Menu Item
[Demo Mode]
[On] [Off]

[System Language]

Menu Item
[System Language]
Description
Setting rear view camera activation.
Setting the polarity of the rear view camera.
The polarity of the connected lead is positive.
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
Description
Setting the demo mode.
Description
Select the system language.
NOTES
• If the embedded language and the selected language setting are
not the same, the text information may not display properly.
• Some characters may not be displayed properly.
- 81 -