Setting The Second Camera; Setting The Camera For Camera View Mode; Setting The Demo Mode; Selecting The System Language - Pioneer AVH-X8890BT Owner's Manual

System settings

Setting the second camera

You can view images of the second camera (a front camera etc.)
on the screen of this product.
Setting the second camera activation
The default setting is "Off".
p This function is synchronized with "AV Input" setting.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Camera settings].
3 Touch [2nd Camera Input] to switch "On" or
"Off".
Setting the reversed image
The default setting is "Off".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p This function is available when "AV Input" is set to
"Camera" or "2nd Camera Input" is set to "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Camera settings].
3 Touch [2nd Camera: Reverse video] to switch
"On" or "Off".
Setting the camera for Camera
View mode
To display Camera View at all times, "Camera View" needs to be
set to "On". (The same mode is turned on when
on the camera view screen. The setting value is synchronized.)
The default setting is "Off".
p To set the rear view camera as the camera for Camera View
mode, set "Back Camera Input" to "On".
 Refer to Setting rear view camera activation on page 38
p When using the second camera, set "AV Input" to
"Camera" or "2nd Camera Input" to "On" (both settings are
synchronized).
 Refer to Setting the second camera on page 39
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Camera settings].
3 Touch [Camera View] to switch "On" or "Off".
p You can also turn this function on by touching [Camera
View] on the AV source selection screen or in the source
list.

Setting the demo mode

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Demo Mode] to switch "On" or "Off".

Selecting the system language

p If the embedded language and the selected language setting
are not the same, text information may not display properly.
p Some characters may not be displayed properly.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [System Language].
3 Touch the language.
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadio Mode by setting the
language of the keyboard for iPhone.
p This function is only available in AppRadio Mode on the
iPhone.
is touched
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Keyboard].
3 Touch the language.
Adjusting the response posi-
tions of the touch panel (touch
panel calibration)
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p Do not turn off the engine while saving the adjusted position
data.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Touch Panel Calibration].
3 Touch two corners of the screen along the
arrows, and then touch the centres of two +
marks at the same time twice.
4 Press the button.
The adjustment results are saved.
5 Press the button once again.
Proceed to 16-point adjustment.
6 Gently touch the centre of the "+" mark dis-
played on the screen.
The target indicates the order.
 When you press the
button, the previous
adjustment position returns.
 When you press and hold the
adjustment is cancelled.
7 Press and hold the button.
The adjustment results are saved.

Setting the dimmer

Setting the dimmer trigger
The default setting is "Auto".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
button, the
39