Characters; Steps For Entering Names And Special Characters - Radio Shack 43-3857 Owner's Manual

14
Select Memory
1. Press
MEM.
2. Press or
VOL
9) to select the memory location where you
would like to store the number.
3. Press or
MEM
4. Press or
MEM
flashes indicating that the display is ready for
the name to be entered.
Edit MemoryXX
If
memory location is already stored. Then you
must either edit the entry in this location, delete
the entry in this location, or select
choose another location.
5. To enter a name (up to 13 characters), use
number keys.
• See "Steps for Entering Names and Special
Characters" on page 15.
• Use #/ and
>
the desired location.
• Use
CH/DELETE
needed.
• Press and hold

characters.

• If a name is not required, go to step 6.
6. Press or
MEM
Number
is displayed.
The cursor flashes indicating that the display is
ready for the number to be entered.
7. Use the number keys to enter the phone
number.
The phone number cannot exceed 20 digits.
is displayed.
, or enter a number (0-
VOL
.
REMOTE/SELECT
. A cursor
REMOTE/SELECT
appears, the selected
to move the cursor to
/TONE/<
to delete characters as
to delete all the
CH/DELETE
.
REMOTE/SELECT
Go Back
to
Store