Steps For Entering Names And Special Characters - Radio Shack 43-3570 Owner's Manual

3. Enter the name (up to 16 characters) by
using the number keypad (see the
"Steps for Entering Names and Special
Characters").
If a name is not required, go to step 4.
<No Name> will be used as the name.
4. Press
SELECT/
Store/Edit No.
5. Press the number keypad to enter the
phone number (up to 20 digits), press
to store the number. Ô
SELECT/
6.
Distinctive Ring
VOL/RING/
the pointer to one of the Distinctive Ring
options, and then press
7. Speed Dial
VOL/RING/
the pointer to select the Speed dial
location (10 locations: SPD1-SPD0). Ô
8. Press
SELECT/
confirmation tone, and
in the display.
S E
TEPS FOR
S
AND PECIAL
Refer to the letters on the number keys to
select the desired characters. With each
press of a number key (
character appears in the following order:
upper case letters first, lower case letters
next and finally the number corresponding
to the key.
Number of times key is pressed
to store the name,
appears.
appears. Press
or to move
VOL/RING/
SELECT/
appears. Press
or to move
VOL/RING/
. You will hear a
Done!
N
NTERING AMES
C
HARACTERS
- ), the displayed
0 9
Ô
• If you choose not to
store a "Distinctive
. Ô
Ring", simply select the
No Selectn
"
• Selecting a speed dial
location where a number
is already stored,
releases the old
number's speed dial
appears
setting. The new number
will be stored in the
speed dial location.
• If you choose not to
store the name/number
as a Speed Dial, simply
select the "
Selectn
Ô
NOTES
" option.
No
" option.
31