Setting Menu Options; Changing The Auto Talk And Cidcw; Entering Your Area Code - Radio Shack 43-3857 Owner's Manual

S M
ETTING ENU
There are five setup options: AutoTalk, CIDCW
(Caller ID on Call Waiting), Area Code, Dial Mode
and Language.
AutoTalk allows you to answer the phone without
pressing the
TALK/FLASH
when AutoTalk is on, simply remove the handset
from the base and the phone automatically answers
the call. If the phone rings when AutoTalk is off, you
must press
TALK/FLASH

Changing the Auto Talk and CIDCW

1. Press and hold
2. Use or
VOL
the selection that you would like to change.
Press
REMOTE/SELECT
Off
and .
3. Press and return the handset to the base
END
unit to complete the setting. The handset
returns to the standby mode.

Entering your Area Code

If you enter a three-digit area code number in the
Area Code
option, your local area code does not
appear in Caller ID messages. Do not program this
option, if your calling area requires ten-digit dialing.
When reviewing Caller ID messages, you will see
only the local seven digit number. For calls received
from outside your local area code, you will see a full
ten-digit number.
1. When the phone is in the standby mode, press
and hold
CID/MENU
2. Press
VOL
3. Press
REMOTE/SELECT
O
PTIONS
button. If the phone rings
to answer the call.
.
CID/MENU
to move the pointer to
VOL
to toggle between
.
Area Code
twice to select
.
On
.
9