Testifire 1001-1 User Manual page 21

4
The initial smoke test will begin automatically
when the head unit is placed over the
detector. Breaking the infrared beam.
6
Raise Testire after desired clearing time to begin
the heat test.
5
When the detector is activated, remove Testire by lowering it
gently. After 2 seconds raise again to begin clearing
7
When the detector is activated, remove Testire by
lowering it gently. Testire will return to idle ready for
the next detector.
www.detectortesters.com/testifire
LOWER FOR
2 SECONDS
21