Advanced Setup; Internal View - Yamaha RX-V100D Service Manual

I ADVANCED SETUP
• Changing Speaker Impedance
To change the Speaker Impedance, do the following pro-
cedure.
1 With the main unit in standby mode, hold down
"STRAIGHT (EFFECT)" key and press "STANDBY/
ON" key.
Then PRESET is displayed.
2 Press "STRAIGHT (EFFECT)" key to select the de-
sired setting.
8 ohms or 4 ohms
3 Press "STANDBY/ON" key.
The main unit changes to standby mode.
Note: The setting you made are reflected the next
time this main unit's power is turned on.
I INTERNAL VIEW
1
K J I
• Resetting the factory presets
2 3 4 5 6 7 8 9
H G
To reset all of parameters, do the following procedure.
This procedure completely resets ALL parameters, in-
cluding the SET MENU, level, assign, and tuner presets.
1 With the main unit in standby mode, hold down
"STRAIGHT (EFFECT)" key and press "STANDBY/
ON" key.
Then PRESET is displayed.
2 Turn "PROGRAM" knob to select PRESET.
3 Press "STRAIGHT (EFFECT)" key to select the de-
sired setting.
RESET To reset the main unit to its factory presets.
CANCEL To cancel without making any changes.
4 Press "STANDBY/ON" key.
If you selected RESET, the main unit is reset its fac-
tory presets and switches to standby mode.
If you selected CANCEL, the main unit switches to
standby mode and nothing is reset.
Note: The setting you made are reflected the next
time this main unit's power is turned on.
1
SUBTRANS (1) P.C.B.
2
DAB P.C.B.
3
MAIN (2) P.C.B.
4
Tuner
5
SUBTRANS (4) P.C.B.
6
SUBTRANS (3) P.C.B.
0
7
SUBTRANS (6) P.C.B.
8
SUBTRANS (7) P.C.B.
A
9
SUBTRANS (9) P.C.B.
B
0
SUBTRANS (2) P.C.B.
C
A
DSP P.C.B.
B
MAIN (1) P.C.B.
D
C
FUNCTION P.C.B.
E
D
POWER (1) P.C.B.
F
E
MAIN (5) P.C.B.
F
POWER (2) P.C.B.
G
OPERATION (5) P.C.B.
H
OPERATION (1) P.C.B.
I
OPERATION (3) P.C.B.
J
OPERATION (2) P.C.B.
K
Power Transformer
RX-V100D
7