Step 4: Connect The Dvr To Home Network; Step 5: Connect The Dvr To Your Tv/Monitor - RCA HSKIT482 Quick Start Manual

Step 4: Connect the DVR to home network

1. Plug one end of the supplied network
cable into the top LAN&USB port on the
back of the DVR.
1 3 5 7
2 4 6 8
D+ D-
VIDEO IN
RS-485

Step 5: Connect the DVR to your TV/monitor

1. Plug one end of the supplied HDMI
cable into the HDMI jack on the back of
the DVR.
1 3 5 7
2 4 6 8
D+ D-
VIDEO IN
RS-485
Optional connection: VGA to monitor
You can also connect the DVR to a VGA monitor. Plug one end of a VGA cable (not included)
into the VGA jack on the back of the DVR. Plug the other end into your monitor.
VGA
IN
OUT
LAN&USB 12V
AUDIO
VGA
IN
OUT
LAN&USB 12V
AUDIO
2. Plug the other end of this network cable
into an open port on the back of your
network router.
Router
back panel
2. Plug the other end of this HDMI cable
into an open HDMI jack on your TV.
Note: When you turn the DVR on, you'll need to use
the INPUT or SOURCE button on your TV's remote
to tune to the input you plugged the DVR into.
TV
5