3. The next screen lets you save your
password to an external USB drive
(like a thumb drive) so that you can
unlock the system if you ever forget the
If you'd like to do this, insert a USB
drive into the available USB port on the
back of the DVR. Then press Yes in the
dialog box shown here and follow the
on-screen instructions to proceed.
Otherwise, click No to continue.
5. Next, select the language you want to
use for setup and menus on the DVR.
Click Apply to proceed.
4. Set up a pattern to unlock the device.
Use the mouse to draw the pattern you
want (click to draw, release when you're
Draw the same pattern again to confirm
6. Select the Start Wizard option and click
Next to launch the Start Wizard.
Continues on the next page...
Note: You must
use at least 4
dots in your