Accessing via Web Browser
This RCA Security System offers access via Web browser as well as through the App and via
connected monitor or TV.
Minimum System Requirements: Internet Explorer 6.0 or later or Apple Safari. Resolutions
1024x768 and above.
1. Right click with the mouse and highlight
Common Menu. Then highlight Network and
The Security System will prompt you to draw
your unlock pattern to access this menu. Use
the mouse to draw this pattern (hold to draw,
release when finished).
2. The Configuration screen appears. Make note
of your system's IP address in the third line on
the left (listed as IPV4). You'll need to use this
information in the next step.
3. On your computer, open your web browser
and enter the IP address of your device (from
step 2) in the browser's address field. Then
4. Log in to the device.
If the device has not been activated, you
need to activate the device first by setting the
password for the admin user account.
If the device is already activated, enter the
user name and password in the login interface,
and click Login.
5. Install the plug-in before viewing the live video
and managing the camera. Please follow the
installation prompts to install the plug-in.
You may have to close the web browser to
finish the installation of the plug-in.
After login, you can perform the operation and
configuration of the device, including the live
view, playback, log search, configuration, etc.