Table of Contents
Advertisement
the tester's 1236 pins of the tester output power for IP camera . The top menu bar display icon"48V
ON", the icon can be moved.
1 .Don't input any power into the "DC12/2A OUTPUT" port of the IPcamera tester to avoid
destroy.
2. Don't output this DC12V/2A power to the DC12V/IN port of the IP camera tester to avoid destroy
3. The IPC tester power output is close to 2A, if the IP camera's power is over 2V, the tester will
auto enter protection mode. Disconnect all the connections of the tester and then connect the
tester with power adaptor to resume the tester.
4. Before turn on the power output, Please make sure the IP camera support s PoE powered.
Otherwise will damage IP camera.
page 70
Advertisement
Table of Contents
