Table of Contents
Advertisement
2. when IP camera type is "Auto"，the tester auto- match the camera type.
IPC Camera's address: Enter IP camera's IP address , click "deploy"to add IP address of the
Different network segments, support multi- network segments' IP camera test .
Click "Search" to auto-scan the IP camera's IP address and display. It is better to directly connect IP
camera to the tester so that the tester will search out only one IP address. If the tester is
connected to PoE switch, it will search out several IP address.
IPC User Name: Enter IP camera's user name
page 44
Advertisement
Table of Contents
