Table of Contents
Advertisement
Press more than 2 seconds, turn on or off the device ,short press to turn on or off
1
the menu display
Set key.
2
Menu key
3
Near focus: Focus the image nearby
4
Far focus: Focus the image faraway
5
TELE: zoom in the image
6
WIDE: zoom out the image
7
Open/set ,Confirm the setting of parameters, open or enlarge the aperture
8
Return/Close : Return or cancel while setting parameters of the menu, close or
9
decrease the aperture
Upward, set function or add parameter. Tilt the PTZ upward
10
Rightward, select the parameter whose value will be changed. Add the value of the
11
parameter. Pan the PTZ right
Confirm key
12
Leftward, select the parameter whose value will be changed
13
Downward, set function or reduce the value of the parameter. Tilt the PTZ
14
downward
Snapshot
15
Video record
16
Open/set ,Confirm the setting of parameters, open or enlarge the aperture
17
Return/Close : Return or cancel while setting parameters of the menu, close or
18
decrease the aperture
The power indicator: it lights green while the tester is powered on by the adapter
19
The data accepted indicator: it lights red while the data is being received
20
page 14
Advertisement
Table of Contents
