Activating The Message Alert; Activating Call Screening; Setting A Security Code Or Personal Identification Number (Pin) - Radio Shack 43-142 User Manual

Beyond the Basics
Activating the Message Alert
The Message Alert feature sounds a short alert tone every 15
seconds whenever you have a new message. To turn on the
message alert:
1. Press the MENU soft key. Select the ANSW. SETUP menu, and
then the MESSAGE ALERT submenu.
2. Move the cursor to select ON or OFF.
3. Press the OK soft key. You will hear a confirmation tone.
Activating Call Screening
Your phone allows you to listen to callers leaving you a message.
This, Call Screen, feature can be turned on or off.
1. Press the MENU soft key. Select the ANSW. SETUP menu and
then the CALL SCREEN submenu.
2. Move the cursor to select ON or OFF.
3. Press the OK soft. You will hear a confirmation tone.
Setting a Security Code or Personal
Identification Number (PIN)
To play your messages from a remote location, you will need
to enter a two-digit Personal Identification Number (PIN) or PIN
Code.
1. Press the MENU soft key. Select the ANSW. SETUP menu, and
then the SECURITY CODE submenu.
2. Enter a two-digit security code (01-99) using the number
keypad 0-9.
3. Press the OK soft key. You will hear a confirmation tone.