Table of Contents
Advertisement
Parts Description
1. ProMeter Front Plate. Meter front plate is made from industrial grade plastic mounted on
the base of the meter using sealed locks to avoid tampering with. Sticker on the meter front
plate can be referred to check the recommended operating condition of the meter.
2. Pulse LED. Te Pulse LED blinks 1000 times for every 1KWH of energy consumed. Its blink
rate increase or decrease according to the load applied. It can be used to test the accuracy
of the meter.
3. Key-Pad and LCD. ProMeter comes with a 10 digit Alphanumeric LCD display to ease with
the view of parameters. A handy keypad with 3 switches on board allows easy user
interaction of the meter.
2
3
1
5
4. Sealable Terminal Cover. Terminal block cover is to shield the open terminal connection of
the meter and power cables. To prevent the tampering it can be sealed after making the
connections.
5. 'Atom' Home Display Unit. If the meter is to be installed in a central control panel, an
additional unit can be installed at the home for user interaction. Atom remains connected to
the meter via a 4-wire telephone cable. Atom replicates the ProMeter entirely and also
generate alarms in sync with the meter. All LCD and keyboard operations of Atom are same
as meter.
Advertisement
Table of Contents
