Table of Contents
Advertisement
DG Phase Selection.
Te Meter can be programmed to select any combination of the phases of auxiliary
supply to be provided to the customer to facilitate the load management of DG.
Load Survey.
ProMeter records the daily consumption records of last 6 months for both supplies. Data
can be read from the ProMeter using RS485 communication. Data can be read in blocks
of 15 days. 12 blocks are available for load survey of 18 days. Te load survey is always
read as FIFO bufer.
Maintenance Charge.
Apart from normal energy consumption charges some amount may be deducted as
standing charges. Te maintenance charge can be set into the meter through
communication. Te standing charges can be programmed to deduct daily, weekly or
monthly. Te time, day and date for the deduction of standing charges can be changed.
Recharge History.
ProMeter keeps a record for last 12 recharges. Te date and time of the recharge along
with the amount of recharge is recorded in the meter itself. This data can be read from
the meter using 485 communication.
Advertisement
Table of Contents
