Adjusting The Handset's Volume; Paging; Memory Dialing; Storing A Number And Name In Memory - Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID Owner's Manual

Radioshack 2.4 ghz digital spread spectrum cordless telephone with call waiting/caller id owner's manual
Table of Contents

Advertisement

ADJUSTING THE
HANDSET'S VOLUME
To adjust the handset's volume during a call,
8 8 8 8
9 9 9 9
press
or
on the handset until you
reach the desired volume level. The number
and a bar graph of the volume level appear.
The volume level setting is maintained even
after you hang up the phone.
8 8 8 8
When you press
Note:
9 9 9 9
at 4 or
while the volume is set at 1, the
handset beeps three times and the setting
does not change.

PAGING

To send a page from the base to the handset
or to locate the handset, when the phone is
not in use, press
on the base. The IN
PAGE
USE/PAGE indicator blinks and the handset
beeps for 15 seconds. Press any key or
place the handset on the base to stop the
page sooner.
Note: The phone rings when a call comes in
while you are using the page feature.

MEMORY DIALING

You can store up to 10 phone numbers and
names in memory, then dial a stored number
by entering its memory location number.
Each number can be up to 20 digits, and
each name can be up to 12 characters.
Storing a Number and Name in
Memory
If you receive a call or someone pages the
handset during memory entry, the phone ex-
its the storing process.
Important: The phone exits the storing pro-
cess if you wait more than 20 seconds be-
tween each keypress.
Follow these steps to store a number and
name in memory.
while the volume is
Operation
1. Lift the handset.
C;CEHO
C;CEHO
C;CEHO
C;CEHO
2. Press
.
appears.
MEM
3. Press a number (
0
9
digit memory location.
rent memory contents if a number is
already stored) appears.
;DJ;HýD7C;
;DJ;HýD7C;
;DJ;HýD7C;
;DJ;HýD7C;
4. Press
.
MEM
do not want to enter a name, skip to
Step 6.
5. To enter a name, use the number keys.
Refer to the letters on the number keys
to select the desired letter. Press the key
once for the first letter in upper case,
press twice for the second letter in upper
case, and so on. To enter the lower case
letter, press four times (or five times) to
display the first letter in lower case, five
or six times for the second letter, and so
on.
For example, to enter John: press
@ @ @ @
once; upper case
appears. Then press
six times; lower case
6
five times; lower case
4
Finally, press
five times; lower case
6
appears.
To enter two letters from the same key in
7 7 7 7
a row, press
to move the cursor to
#/
the next position. For example to enter
7 7 7 7
AB, press
2
;
appears. Press
move the cursor to the next position,
then press
twice so
2
To enter a space, press
out entering any character.
To enter a number, repeatedly press the
corresponding number key until the
number appears.
) to choose a two-
;cfjo
;cfjo
;cfjo
;cfjo
(or the cur-
appears. If you
5
e e e e
appears. Press
^ ^ ^ ^
appears.
d d d d
7 7 7 7
#/
to
8 8 8 8
appears.
7 7 7 7
twice with-
#/
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

43-3519

Table of Contents