Table of Contents
Advertisement
1 in to back
(25 mm)
0 in to standoffs
30 in to ceiling
1 in to side
(762 mm)
(25 mm)
Drywall
0 in
Combustible flooring may be installed next to the front of the appliance.
36 in
(914 mm)
0 in to floor
5-1/2 in.
(138 mm)
74-5/8 in
(1895 mm)
29-3/4 in
(1330 mm)
51-3/8 in
(1305 mm)
51-1/4 in
(1302 mm)
*
28 in
(713 mm)
* If the inside of the framed cavity is to be finished, the framing dimensions must include the finished surface. If dry-
wall is to be attached to the rear wall, the depth must be measured from the drywall surface.
* Add 9-1/4 inches to framing depth for an elbow vented off the rear of the appliance.
Figure 3.4 Clearances to Combustibles
Heatilator • LEGACY42-IFT Installation Manual • 4095-901 Rev. A • 12/17
11
Hide quick links:
Advertisement
Table of Contents
