[Exposure]
Exposure Mode: Select the correct exposure mode to achieve the desired exposure
effect. The default setting is Outdoor.
Shutter (s): The length of time that allows light to enter into the lens. You can set a
shutter speed when Exposure Mode is set to Manual.
Note: If Slow Shutter is set to Off, the reciprocal of the shutter speed must be greater than
the frame rate.
Gain: Control image signals so that the camera outputs standard video signals
according to the light condition. You can set this parameter only when Exposure Mode
is set to Manual.
Slow Shutter: Improve image brightness in low light conditions.
Slowest Shutter: Set the slowest shutter speed that the camera can use during
exposure.
Figure 3-18
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com