F4GE N SERIES
COOLING SYSTEM
The engine cooling system, closed circuit forced circulation
type, generally incorporates the following components:
- Expansion tank; placement, shape and dimensions are
subject to change according to the engine's equipment.
- Radiator, which has the duty to dissipate the heat
subtracted to the engine by the cooling liquid. Also this
component will have specific peculiarities based on the
equipment developed, both for what concerns the
placement and the dimensions.
- Visc pusher fan, having the duty to increase the heat
dissipating power of the radiator. This component as well
will be specifically equipped based on the engine's
development.
Figure 3
TO RADIATOR
FROM RADIATOR
Water coming out from thermostat
Water recirculating in engine
Water coming into pump
Print P2D32N010 E
- Heat exchanger to cool the lubrication oil: even this
component is part of the engine's specific equipment.
- Centrifugal water pump, placed in the front part of the
engine block.
- Thermostat regulating the circulation of the cooling liquid.
COOLING SYSTEM LAYOUT
SECTION 1 - GENERAL SPECIFICATIONS
Base - February 2009
5
127129