Introduction; I-Core Interface And Key Components - Hunter i-core IC-600PL Owner's Manual And Installation Instructions

INTRODUCTION
The Hunter I-Core controller is a full-featured controller for demanding commercial and high-end residential appli cations . Versatility is what makes the I-Core
one of Hunter's highest performing irrigation controllers.
I-Core features include:
Modular design expandab le from 6 to 30 stations
(plastic cabinet) and 6 to 42 stations (metal/ sta inless cabinet)
4 fully independent programs
Diagnostic Dashboard'" monitors system operation and provides
real-time sensor and controller status
Real-t ime fl ow monitoring
Remote control ready with factory installed SmartPort®
Seasona l adjustment independent by program: Can be set globally,
monthly, or through Solar Sync
Water Window Manager'": User defi ned hours when wateri ng is
allowed
Easy Retrieve'" Memory: Saves preferred program in memory
Large, backlit display for easy programm ing
Multi -language programming capability
Automatic short circuit protection
Built in Solar Sync capability
I-CORE INTERFACE AND KEY COMPONENTS
1. LCD Display - Backlit, adjustable contrast display
2.
+
Button - Increases flashing value depending on function
3. - Button - Decreases flash ing value depend ing on function
4. .6. 1" (Up and Down Arrow Buttons) - Used to move up and down
through adjustable functions in various screens, and change selections
in certain screens
5.
~
... (Left and Right Arrow Buttons) - Used to move left and right
in various screens, and change important selections such as Stations,
Start Times, and Water Days
6. PRG (Program Button) - Selects one of the automatic Programs (A-D),
and also starts the test program
7. Programming Dial - Used to access all of the programming functions
of the I-Core. The most basic automatic watering is set up in the first 4
dial positions
8. Ra in Sensor Bypass Switch - Allows user to bypass weather sensor if
one is installed
9. System Status Dashboard - LED lights provide system status
information regarding sensor status, valve operation , and flow
monitoring
10. Removable Facepack - I-Core facepack can be removed from
controller for remote programming
Note:
This product should not be used for anything other than what is
described in this document.
This product should only be serviced by trained and authorized personnel.
Th is product is design ed for continuo us outdoor use from O' F/ - 18 • C
t o 140' F/ 60' C.
These un its have an IP44 rating.
Th is cont roller is not intended fo r use by young children or infirm
persons without supervision ; young chi ldren should be supervised to
ensure that they do not play with the appliance.
0