Nokia 3250 User Manual page 104

C o n n e c t i v i t y
display one by one. You can see a device icon, the device name, the
device type, or a short name. Paired devices are shown with
To interrupt the search, select Stop. The device list freezes and you
can start to form a connection to one of the devices already found.
4. When searching for devices, some devices may show only the unique
device addresses. To find out the unique address of your phone, enter
the code *#2820# in the standby mode.
If you have searched for devices earlier, a list of the devices that were
found previously is shown first. To start a new search, select
devices. If you switch off the phone, the list of devices is cleared and
the device search needs to be started again before sending data.
5. Scroll to the device you want to connect with, and select it. The item
you are sending is copied to the outbox, and the note
shown.
6. Pairing (if not required by the other device, go to step 7.)
• If the other device requires pairing before data can be
transmitted, a tone sounds and you are asked to enter a passcode.
• Create your own passcode (1-16 characters long, numeric) and
agree with the owner of the other device to use the same code.
This passcode is used only once and you do not have to memorize
it.
• After pairing, the device is saved to the
7. When the connection has been successfully established, the note
Sending data is shown.
Data received using Bluetooth connection can be found in the
folder in Messag..
Icons for different devices:
video), and (Bluetooth
If sending fails, the message or data are deleted. The
Messag. does not store messages sent using a Bluetooth connection.
104
(Computer),
device)
More
Connecting
Paired devic. view.
Inbox
(Phone), (Audio/
Drafts folder in
.
is