Hardware Installation; Power Supply Connector - Technology SPX5 User Manual

Hardware Installation

Top and Bottom View
Figure 2. SPX5 Dimensions.

Power Supply Connector

The SPX5 can be powered with a 9 to 48 Volts DC power supply and the maximum power
consumption is of 5Watts. The power supply connector is located on the top side of the
gateway and the terminals are shown of Figure 3. The FG terminal must be connected to
the field ground to avoid electromagnetic interference and allow all the over voltage
protections to operate properly.
Figure 3. Power Supply Connector Terminals Distribution.
IZI Technology Inc, 3651 Pegasus Dr. Ste. 117 Bakersfield, CA 93308 USA.
Tel: (661) 412-3494 -- email:
www.izitechnology.com
Right Side View
sales@izitechnology.com
View from Behind