Network Protocols Configuration - Technology SPX5 User Manual

Figure 18. Wireless LAN Configuration Sections
Depending on the type of encryption in the network the user will have to enter a Passphrase. The
Passphrase is the network encryption key and it must be 9 characters or longer.
MAC Address Whitelist:
When enabled, this option only allows devices with the entered MAC address to connect to the
SPX5. The friendly name is a guide for the user to enter the device that contains that MAC
Address.

Network Protocols Configuration

At this moment there are four types of network protocols that can be configured on the SPX5:
Modbus TCP/IP Client, Modbus TCP/IP Server, Ethernet/IP Tag Based Client and NTP (Network
Time Protocol). It is very important to indicate that all these protocols can be enabled at the same
time or even multiple instances of some of these protocols can be enabled at the same time. For
example it is possible to enable multiple Modbus TCP/IP Clients to more efficiently connect to
several Modbus Devices. Server protocols only support one instance at a time.
Every protocol added has a General Settings section where a name and a comments area is
available for the user to comment about the use of that specific protocol.
IZI Technology Inc, 3651 Pegasus Dr. Ste. 117 Bakersfield, CA 93308 USA.
Tel: (661) 412-3494 -- email:
www.izitechnology.com
sales@izitechnology.com