Operation And Configuration Of The Spx5 - Technology SPX5 User Manual

Figure 11. Main configuration page of the SPX5.

Operation and Configuration of the SPX5

The SPX5 is an industrial communication gateway that allows transferring value to and from its
internal database. Using any of the supported protocols, the information is read from a device and
copied in the internal memory of the SPX5. Then using another protocol that same information is
transferred to a different device.
The SPX5 also supports writing simple user scripts that allow conversion of data values or executing
logic upon communication events. There are three types of scripts available on the SPX5: Startup,
Continuous, and Fault. The Startup script is executed on startup (every time the gateway cycles
power or after configuration changes). The Continuous script executes constantly during operation,
for this reason is important to make this script in an efficient way, to avoid interrupting
communications. The Fault Script is executed if an error is found on the Continuous Script.
IZI Technology Inc, 3651 Pegasus Dr. Ste. 117 Bakersfield, CA 93308 USA.
Tel: (661) 412-3494 -- email: sales@izitechnology.com
www.izitechnology.com