The main display screen reappears:
3. Press the CURSOR
10s digit.
4. Press the navigation wheel
indicator appears in the upper left corner of the display.
5. Turn the navigation wheel
20.0000 V, and then press the navigation wheel
selection and exit EDIT mode.
keys to move the cursor to the
to enter EDIT mode. The EDIT
to set the source value to
to enter the
Step 2: Set the source limit
1. Press the LIMIT
key. You will see a blinking character in the
LimA value field.
2. While that character is still blinking, press the down
RANGE
keys as needed to select the 10 mA limit range.
Verify that the source limit value in the LimA field is
10.0000 mA.