Subscribe to Our Youtube Channel
Related Manuals for Sensing Labs SenlabA 4MA-LAB-13NS
Summary of Contents for Sensing Labs SenlabA 4MA-LAB-13NS
- Page 1 SENSING LABS SAS Cap Oméga Rond-point Benjamin Franklin CS 39521 34960 - Montpellier Cedex 2 France www.sensing-labs.com SenlabA 4MA-LAB-xxNS © User guide SENSING-LABS VERSION 02 – REV D / FEBRUARY 2018...
-
Page 2: General Overview
Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D Thank you for your choosing our Senlab product! We hope you will find the instructions on this user manual clear and easy to follow. General overview The Senlab Analog (SenlabA) sensor is a smart LoRaWAN™ radio device with an analog 4-20mA input. - Page 3 Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D Provisioning of the device You have to be sure that your Senlab device has been well commissioned to be able to reach your LoRaWAN network. ✓ Contact if needed your distributor to get your Senlab configuration ✓...
-
Page 4: On-Site Installation
Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D On-site installation ➢ POSITIONING: You have first to find the best position to your Senlab: ✓ Prefer vertical position (antenna part upwards as on following pictures) ✓ Avoid positioning the cable pulled vertically under the device (prefer coiled... - Page 5 Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D Activation of the device To activate the Senlab device, you have to use a magnet (min pulling force 1Kg). LED Status Put Magnet 1 sec LED blinking up to 10s (connection status...)
- Page 6 Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D Application features (datalog mode) This chapter describes the SenlabA application features available in datalog mode (accessible via SLgateway or SLcodec – refer respective User Guide for more details)
- Page 7 Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D Standard mode (1 log per transmission) This chapter describes the SenlabA application standard frame formats for decoding device payload by yourself. Uplink message RESTART - FPort 4 (for device configured in standard mode) This frame is automatically sent after a successful network connection for informing the application layer of its activation.
-
Page 8: Electrical Safety
Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D Battery replacement (Indoor version only) Replacement battery must by a Lithium 3,6V AA type with 50mA min of supported continuous current Contact your distributor to get original battery reference. - Page 9 Sensing Labs SenlabA 4MA-LAB-xxNS – User guide – Version 2 – REV D Legals SENSING LABS SAS reserves the right to make corrections, modifications, enhancements, improvements and other changes to its products and services at any time and to discontinue any product or service without notice.
Need help?
Do you have a question about the SenlabA 4MA-LAB-13NS and is the answer not in the manual?
Questions and answers