Section 2 - Controls & Indicators; Setting The Clock; Programming On/Off Features - Keurig B80V Owner's Manual

SECTION 2
Controls & Indicators (Touch Screen)

Setting the Clock

Setting the clock is optional. When the clock is set, the time will appear in
the Touch Screen. NOTE: You must set the clock if you will be using the
On/Off Time programming feature.
Press the MENU Button.
1.
Note: If Touch Screen is not illuminated,
simply touch to illuminate options.
The word 'OFF' will appear at the top of
2.
the Touch Screen to indicate that the
clock is not set. The programming
options will appear on the Touch Screen
with a small arrow pointing to 'SET
CLOCK'. The "H" icon will be lit and the
HOUR will flash.
Press or hold the Up or Down Button
3.
until you have reached the appropriate
hour. If the hour has passed 12, "PM"
will be shown.
Press the "M" icon and minutes will be
4.
flashing. Set the minutes following the
same procedure as with the hours.
When you have reached the correct
5.
time, press the MENU Button until you
have exited the Brewer Menu section.
The correct time should now be
6.
displayed in the Touch Screen.
NOTE: If power is interrupted to the Brewer by
unplugging it, or if power is lost, follow the
procedure above to reset the time as the clock
will not be visible until the time is set. Brew size
and brew temperature menu settings are
remembered and restored automatically. All other
settings will be restored automatically after clock
is set.

Programming On/Off Features

The Brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule. By programming your Brewer to turn on
each morning, you will never have to wait for the Brewer to warm up to brew
a gourmet cup of coffee. It will take the Brewer approximately 4 minutes to
warm up from room temperature.
1.
2.
a.
b.
c.
d.
8
Leave it ON all the time. The Brewer
can be left on all the time so that it is
always ready to brew a fresh cup of
gourmet coffee, tea or hot cocoa. To
turn the Brewer off at any time, simply
press and release the Power Button.
Press and release the Power Button
again to restore power to the Brewer.
You will have to wait for the water to
heat up before the Brewer is ready to
brew.
Set the Brewer to "AUTO OFF" following
a specified period of time after the last
brew.
Press the MENU Button three times to
program the Auto Off feature. The
Touch Screen will now display the
programming options with a small arrow
next to "SET AUTO OFF" .
Press or hold the Up or Down Buttons to
advance or reverse 1 hour at a time, up
to 9 hours.
After setting the desired Auto Off time,
press the MENU Button until you have
exited the programming mode. "AUTO
OFF SET" will now be displayed to
indicate that it has been set.
To cancel the Auto Off feature, press
the MENU Button three times to reach
the "AUTO OFF" programming mode.
Press and release the Up or Down