Set-Up; Helpful Hints; Unpacking - Keurig B80V Owner's Manual

Set-up

Helpful Hints

1. Keep your Brewer turned "ON" at all times. To brew a fresh cup of
coffee, tea or hot cocoa anytime you want, we suggest you keep
your Brewer turned "ON" all the time. However, the Brewer is fully
programmable so you can set it to turn on and off automatically to
match your schedule. Or, if you prefer, set the Brewer to
automatically turn off after a period of time. Follow the simple
instructions on pages 9–10 to make using the Brewer convenient
for you.
2. For the best tasting gourmet coffee, tea or hot cocoa, Keurig
recommends using bottled water or the Keurig® Water Filter Starter
Kit (available at www.keurig.com). Water quality varies from place
to place. If you notice an undesirable taste in your cup of coffee,
such as chlorine or other mineral tastes, we recommend you
consider using bottled water or water from a filtration system.
3. Plug Brewer into its own grounded outlet. If the electric circuit is
overloaded with other appliances, your Brewer may not function
properly. The Brewer should be operated on its own circuit,
separate from other appliances.
4. Brewing into a travel mug. To brew into a travel mug, simply
remove the Drip Tray Assembly and place the travel mug on the
Drip Tray Base.
5. De-scale Brewer regularly. Please see page 13 for instructions.
Unpacking Instructions
1. Place Brewer box on a large steady surface (such as a table or
countertop) or on the floor. Open the box.
Remove enclosed literature.
2.
Turn the box on its side with front of box face down.
3.
Reach into the box and grasp the plastic bag that contains the
4.
Brewer.
5. Carefully pull the plastic bag (and packaging materials) toward you
and out of the box. The Brewer will still be encased in the polyfoam
and be on its side.
Remove the top polyfoam packaging material.
6.
7. Carefully lift Brewer off of the bottom polyfoam and place it upright
on a flat, steady surface.
Lift plastic bag off of Brewer.
8.
9. Record the serial number for this Brewer on page 3 of this guide.
The serial number can be found on the bottom of the Brewer box or
on the Brewer behind the Drip Tray (when removed).
10. Place the Brewer upright on a flat, steady surface. Remove tape
holding Water Reservoir in place.
We recommend you save all packing materials in case future shipping
of the product is necessary.
Keep all plastic bags away from children.
4
WARNING: