Programming Brew Temperature; Section 3 - Cleaning & Maintenance; Cleaning; De-Scaling - Keurig B80V Owner's Manual

Programming Brew Temperature (187° – 197º F)
The Brewer brews at a preset temperature of 192° . You can adjust this
temperature up/down by 5 degrees if you prefer a cooler cup of coffee, tea
or hot cocoa. Simply follow the instructions below.
Press the MENU Button on the Touch Screen five times to program the
1.
Brew Temperature feature.
The Touch Screen will now display the programming options with a
2.
small arrow next to "SET BREW TEMP" . Also, the temperature 192°
(initial setting) will be displayed at the top of the Touch Screen to
indicate the current temperature setting.
Press or hold the Down and Up Buttons to decrease or increase the
3.
brew temperature.
Once you have reached your desired brew temperature, press the
4.
MENU Button once to exit the programming mode. "BREW TEMP SET"
will be displayed in the Touch Screen if you have changed it from 192° .
To change the brew temperature again, repeat steps 1 through 3 to
5.
change the temperature up or down, remembering that the temperature
can only be between 187° and 197° .
NOTE: At high altitudes (over 5,000 feet) if boiling occurs use the temperature
adjustment to lower the temperature.
SECTION 3
Cleaning & Maintenance
Cleaning External Parts
Regular cleaning of the Brewer's external components is recommended.
1. Never immerse the Brewer in water or other liquids. The Housing
and other external components may be cleaned with a soapy, damp,
non-abrasive cloth.
The Drip Tray can accumulate up to 18 ounces of overflow. The
2.
Drip Tray and Drip Tray Plate should be periodically inspected and
rinsed clean. To remove the Drip Tray Assembly, simply slide it toward
you, keeping it level at all times to avoid spilling. The Drip Tray and
Drip Tray Plate should not be placed in the dishwasher. They should
be cleaned with a damp, soapy, non-abrasive cloth and rinsed
thoroughly.
Cleaning the Water Reservoir & Water Reservoir Lid
The Water Reservoir Lid or Water Reservoir should not be put into the
dishwasher. They should be cleaned with a damp, soapy, non-abrasive cloth
and rinsed thoroughly. Do not dry the inside of the Water Reservoir with a
cloth as lint may remain.
CAUTION: Please rinse the Water Reservoir thoroughly after cleaning to ensure
that no cleaners or cleaning solutions remain in this area as they may contaminate
the water supply in the Brewer.
De-Scaling Your Brewer
Mineral content in water varies from place to place. Depending on the
mineral content of the water in your area, calcium deposits or scale may
build up in your Brewer. Scale is non-toxic, but left unattended, it can hinder
Brewer performance. De-scaling your Brewer helps maintain the heating
element and other internal parts of the Brewer that come in contact with
water.
The Brewer should be de-scaled every 3-6 months to ensure optimal
performance. It is possible for calcium deposits to build up faster, making it
necessary to de-scale more often.
This Brewer is equipped with sensors to detect when scale buildup is
interfering with the performance of the Brewer. When this is detected, "DE-
SCALE" will be displayed on the Touch Screen (fig. 19). However, even if
10