NETGEAR R6350 User Manual page 142

The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Wireless Access Point.
The Wireless Access Point page displays.
6. Select the Enable Access Point Mode check box.
The page expands.
7. Scroll down and select the radio button for the IP address setting that you want to use:
• Get dynamically from existing router. The other router on the network assigns an IP address to
the router while the router functions in access point mode. This is the default setting.
• Use fixed IP Address (not recommended). Use this setting if you want to manually assign a specific
IP address to the router while it functions in access point mode. Using this option effectively requires
network experience.
Note To avoid interference with other routers or gateways on your network, we recommend
that you use different WiFi settings on each router. You can also turn off the WiFi
radio on the other router or gateway and use the router only for WiFi client access.
8. Click the Apply button.
The IP address of the router changes, and you are disconnected.
9. To reconnect, close and restart your web browser and enter http://www.routerlogin.net.
AC1750 Smart WiFi Router Model R6350
Manage the Advanced WiFi Features
142