Cordless Telephone Operation
Placing Calls
talk
1. Press the
button, the Call Timer starts to count.
The HANDSET LCD Screen will display " CALLS " , and
" TALKING " , and the BASE UNIT IN USE LED indicator
will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When you have finished with your call, press the
button again or place the HANDSET on the BASE UNIT.
OR
1. Dial the phone number.
2. Press and hold down the DIAL 7
or the DIAL1+
USE LED indicator will light up.
3. When you have finished with your call, press the
button again or place the HANDSET on the BASE UNIT.
Headset Feature
Your telephone can utilize a headset (not included) to be
connected to your HANDSET for you to enjoy hands-free
communication. Pull out the HEADSET JACK COVER, then
insert the small plug at the end of the headset into the
HEADSET JACK at the right side of the HANDSET. Follow the
procedures discussed in " Receiving Calls " and " Placing Calls "
to receive and place a call.
NOTE: When you plug the headset plug into the HEADSET
JACK it automatically mutes the MICROPHONE and
SPEAKER of the HANDSET. Unplug the headset to
return the HANDSET to normal use.
Headsets are available at most retail outlets that sell telephone
equipment. The HEADSET JACK is compatible with 2.5mm
headset plugs only.
tallk
or the DIAL 10
1+
#
button. The BASE UNIT IN
talk
12
CALLS
TALKING. . . .