Denon DN-700AV User Manual page 5

Display
1. Decoder Indicators: This illuminates when the respective decoders are operating.
2. Input Signal Indicators: This illuminates when an input signal is detected.
3. Information Display: The input source name, surround mode, setting values, and other information is shown
here.
4. Front Speaker Indicator: This illuminates according to the setting of the front A and B speakers.
5. Multi-zone Indicators: This illuminates when Zone 2 is powered on.
6. Master Volume Indicator: This illuminates when the master volume is adjusted.
7. Sleep Timer Indicator: This illuminates when the sleep mode is selected.
8. Mute Indicator: This illuminates when the mute mode is selected.
9. Surround Back Indicator: This illuminates when audio signals are being sent to the surround back L/R
speakers.
10. Input Mode Indicators: Sets the audio input modes for the different input sources.
11. Restorer Indicator: This illuminates when the Restorer mode is selected. Compressed audio formats such as
MP3, WMA (Windows Media Audio), and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The Restorer function generates the signals eliminated
upon compression, restoring the sound to conditions near those of the original sound before compression. It
also corrects the bass volume to obtain richer sound with compressed audio signals.
Settings:
OFF: The Restorer setting is not in use.
Mode1 (Restorer 64): Optimized for compressed sources with very weak highs.
Mode2 (Restorer 96): Applies suitable bass and treble boost for all compressed sources.
Mode3 (Restorer HQ): Optimized for compressed sources with normal highs.
Notes:
•
The Restorer settings are stored for each input source.
•
When set to something other than "Off", RSTR is displayed.
•
The Restorer settings cannot be used when the surround mode is set to "Direct".
12. HDMI Indicator: This illuminates when playing a source using a HDMI connection.
5