Table of Contents
Advertisement
Start IP
End IP
You de i e s DHCP se e a
specified network devices, identified by their unique MAC address.
Enable Static DHCP
Leases
MAC Address
IP Address
Add
Clear
Delete Selected /
Delete All
The LAN IP page will be displayed as below when your device is
set to access point mode. You can set theBR-6208AC V2 to obtain
an IP address automatically or you can specify an IP address.
Enter the start IP address for the DHCP
se e s IP add ess leases.
Enter the end IP address for the DHCP
se e s IP add ess leases.
e o figu ed to assig stati fi ed IP add esses to
Enable/disable static DHCP leases. This must
be enabled in order to assign any network
device a static IP address.
Enter the spe ified et o k de i e s MAC
address here.
Assign a fixed IP address for the specified
network device here.
Add the information to the Static DHCP
Leases Table .
Clear the MAC address and IP address fields.
Delete selected or all entries from the table.
60
Advertisement
Table of Contents
