Beale Street Audio IC6-B Installation Manual page 6

Installation
• With the 'dogs' flush to the side of the speaker, insert the speaker into
the ceiling and tighten each of the four screws for the speakers' dogs,
enough to clamp the speaker to the drywall. Do not over-tighten.
Turn screws to extend dogs
as shown
• With the speaker installed, the tweeter can be pivoted to point directly
into the main listening area for tighter imaging of high frequency
content. Pointing the tweeter away from the main listening area will
create a more ambient sound.
Carefully press the edge of the
tweeter as shown to pivot the
tweeter to the desired position.
16AWG (min)
Stranded Speaker Wire
+ to +
- to -
Amplifier Speaker Terminal
16AWG (min)
Stranded Speaker Wire
+ to +
- to -
L- L+ R- R+
6
Turn screws to extend dogs
as shown